HOME > TYPES > WASHER TYPES
Hillside Washer
These washers are shaped like a half-moon, domed on one side and flat on the other. They are used to fasten diagonal or crossed tie rods in structural applications. The flat side rests on a flat surface of a beam. Then a tie rod is place through the washer and a nut can be fastened to the domed side in a variety of angles.
Other Names: Half-Moon Washer
Dimensions
| Nominal Dia. | Slot Width | Width | Length | Height |
|---|---|---|---|---|
| 1/2 | 9/16 | 1.313 | 2.063 | 0.938 |
| 5/8 | 11/16 | 1.438 | 2.250 | 1.125 |
| 3/4 | 13/16 | 1.625 | 2.375 | 1.125 |
| 7/8 | 15/16 | 1.813 | 2.875 | 1.313 |
| 1 | 1 | 2.000 | 3.063 | 1.500 |
| 1 1/4 | 1 1/8 | 2.375 | 4.750 | 1.688 |