HOME > TYPES > ANCHOR TYPES
Drop In
Internally threaded anchor designed to make female threads into concrete. Often used to suspend objects, such as piping, from concrete ceilings.
Base Materials: Solid Concrete
Installation: Drill recommended sized hole in base material. Make sure to drill to the proper embedment length. Set the anchor into the hole and tap down until flush. Use the setting tool and a hammer to drive the internal locking mechanism into place.
Drill Bit and Allowable Load Data
| Thread Dia. | Drill Bit | Embed Length | Tension (lbs.) | Shear (lbs.) |
|---|---|---|---|---|
| 1/4 | 3/8 | 1 | 495 | 530 |
| 3/8 | 1/2 | 1 9/16 | 1045 | 1145 |
| 1/2 | 5/8 | 2 | 1440 | 1600 |
| 5/8 | 7/8 | 2 1/2 | 1860 | 3095 |
| 3/4 | 1 | 3 3/16 | 2350 | 3920 |
Allowable Load (Safety Factor of 4). Based off 4000 psi Normal Weight Concrete
Powers Spec Sheet